|
LONG REACH HOLE PUNCHES |
|---|
The Model No. 404, 405, 464, 484 and No. 439S, 439 are Long Reach Punches that have a Longer Reach so they are able to punch the hole or design further in on the paper. These punches feature Malleable Iron Castings with a Heavy Nickel Plating, buffed to a high luster. They use Clear Cutting Hardened Steel Dies made with extreme accuracy and have an easy action spring.
|
|
MODEL #404 THE MODEL #404 HOLE PUNCH HAS A 2" INCH REACH FROM THE EDGE OF THE CARD OR PAPER. TOTAL LENGTH IS 5 3/4" |
|
|
MODEL #405 THE MODEL #404 HOLE PUNCH HAS A 2 1/2" INCH REACH FROM THE EDGE OF THE CARD OR PAPER. TOTAL LENGTH IS 6" |
|
ROUND HOLES - Any size from 1/16" to 1/4" diameter.
|
SINGLE FIGURES from 0 - 9 1/4" size |
|
|
THE MODEL #464 HOLE PUNCH HAS A
|
| A - Round Holes.............1/8" 3/16"
1/4" B - Round Holes.............5/16" 3/8" C - Single figure character 0 to 9, or letters A to Z - 1/8" or 3/16" size. D - Single figure characeters 0 to 9 or letters A to Z - 1/4" size. E - Full selection of assorted designs. |
F - Two
character figures combination 1 figure and 1 letter -
G -
Any combination 2 letters as etc. - 1/8," 3/16," or 1/4" size. H - Any combination of 3 letters or figures as "AMB," "SRY," etc., 1/8" size. |
to 
or
,
, 
Model No.484
This punch is designed for use where a very deep slot is required.
|
Model No.484 This punch is designed for use where a very deep slot is required. |
THE MODEL #484 HOLE PUNCH HAS A ONLY Available in 3/16” or 1/4” Round Hole |
Coupon Book Punches
|
|
MODEL #439S
MODEL #439 THE MODEL #439 HOLE PUNCH HAS A 2 3/16" INCH REACH FROM THE EDGE OF THE CARD OR PAPER. 1/16" capacity for use on piece work or time cards or wherever a long reach is required |
| ROUND HOLES - Any size from 1/16" to 3/16" dia.. SINGLE FIGURES from 0 - 9 3/16" size SINGLE LETTER from A - Z 3/16" size |
